rMI - REPAIR kits

Fluid Applied Roofing System

The RMI roof repair kits consists of three distinct materials, a primer RMI-Prime to prepare the existing surface for maximum adhesion, a fluid applied membrane -RMI Flex and a liquid applied roof (wear surface) coating - RMI Thane.

 

• These new year-round roof repair kits are comprised of the same 30-year-old RMI system components

   found on our large commercial projects but without the55-gallon drum and custom spray equipment.

• Perfect for extreme weather repairs be it below freezing (32F) or extreme heat (180F).

• Sets up and waterproof in minutes/hours not days. Does not require reinforcements.

• RMI Flex has 100% solids and 0% VOC. No shrinkage, 100% memory. What you apply is what you get.

• 10-50-100 sq. ft. kits to mix and match your exact repair needs. Each kit contains just the right amount

   of RMI Primer, pre-measured RMI Flex (Parts A&B) and RMI Thane.

 

    REPAIR 10 (Sq. Ft.)

     RMI-Prime: ½ Pint (0.237L) (Fast dry additive not included)

     RMI-Flex Part A (ISO): ½ Pint (0.237L)

     RMI-Flex Part B (Resin) 1 Quart (0.946353L)

     RMI-Thane (Silver Surface Coating) 1 Pint (0.473L)

     Stir Sticks – Mil Thickness Gauges

 

     REPAIR 50 (Sq. Ft.)

     RMI-Prime: 1 Pint (0.473L) (Fast dry additive not included)

     RMI-Flex Part A (ISO) 1 Pint (0.473L)

     RMI-Flex Part B (Resin) 1 Gallon (3.8L)

     RMI-Thane (Silver Surface Coating) 2 Quart (.946L each)

     Stir Sticks – Mil Thickness Gauges

 

     REPAIR 100 (Sq. Ft.)

     RMI-Prime: 1 Quart (0.946353L)

     (Fast dry additive not included)

     RMI-Flex Part A (ISO) 2 Pints (0.473L) each

     RMI-Flex Part B (Resin) 2 Gallons (3.8L) each

     RMI-Thane (Silver Surface Coating) 1 Gallon (3.8L)

     Stir Sticks – Mil Thickness Gauges

 

 

 

 

 

 

Seeing is believing

RMI REPAIR KIT INSTALLATION SHEET PDF'S

Typical Metal Equipment Curb

Typical Metal

Roof Jack

Typical Metal Wall Counterflashing

Typical Cast

Iron Drain

Typical Support Block - Wood Sleeper

Typical

Perimeter Edge

Typical Field Lap

Typical Metal Lap

Typical Metal Gutter Inlet Drain - 1

Typical Metal Gutter Inlet Drain - 2

Typical Penetration - Support

RMI Tech-Bulletin

#1200-111518

Phone: 469.952.5842

P.O. Box 502 • Chapman, Kansas 67431

P.O. Box 6381 • McKinney, Texas 75071

© 2015 - 2018 RoofMart International, Inc